
120 Volt Rope Light/Strip Light/Neon Strip Light Weatherproofing Kit - Outdoor Adhesive Glue Lined Heat Shrink (2pk)
- Compatibility:
- 120V Rope Light, Strip Light, Neon Strip Light
- Installation:
- LED Rope Light, Strip Light, & Neon Strip Light Weatherproofing Guide
Product Overview
Great for weatherproofing power cords, end caps, inline splices, as well as 'T' and 'Y' connectors. The included special heat-shrink tape molds around connections to form a weather-tight seal. This kit includes two pieces of shrink tube backed with adhesive heat shrink-tape. (Heat Gun required for use.) Recommended combined use with our Premium Silicone Sealant
This kit will accommodate 120 volt 3/8 inch & 1/2 inch rope light as well as 120 volt strip light and 120 volt SMD neon strip light. Check out our smaller weatherproofing kit for applications using 12 volt strip light or use our largest weatherproofing kit for neon rope light and RGB rope light applications.
- For use with connections and end caps
- Helps provide weather-tight seal
- Easy to use; just apply heat
- Each kit seals 2 connections
Outdoor Shrink Kit Installation Instructions:
Slide your heat shrink tubing over the lighting and connector. Shrink the tubing using a heat gun. The adhesive will melt when the heat is applied and solidify when cooled creating a watertight seal.
The minimum melting point of the hot melt adhesive is 95*C (204*F).
For additional tips and tricks see our guide on weatherproofing your lights.