Orange 1/2" Round LED Neon Rope Light - 120 Volt - 148 Foot Spool

Add vibrant orange illumination to architectural, decorative, and display projects with this Orange 1/2" Round LED Neon Rope Light. The flexible round profile provides 360-degree illumination for a continuous glow around the entire rope, while 120 SMD2835 LEDs per meter create consistent light along its length. Its flexible construction allows it to follow curves, outlines, signs, and custom shapes.

With 120V operation and an IP65 rating, this LED neon rope is designed for indoor and outdoor applications. The rope can be cut every 50cm at designated cutting points, making it easy to create custom lengths. Multiple roll options and a rated life of up to 50,000 hours make it suitable for commercial, architectural, seasonal, and decorative installations.

Orange 1/2" Round LED neon rope lights can be cut in 19.5 inch sections and come ready with everything for a basic installation in a 148 foot spool. If you don’t need a whole spool, you can order a custom length in our custom cut section.

Features:

• 360° Illumination: Round 1/2" profile provides continuous illumination around the entire rope for a smooth, uniform neon appearance.
• Flexible & Cuttable: Flexible construction can be bent around curves and custom shapes, with designated cutting points every 50cm for custom-length installations.
• 120V AC Operation: Designed for 120V AC installations and does not require a separate power supply.
• IP65 Rated: Provides protection from dust and water, making it suitable for indoor and outdoor lighting applications.
• 120 LEDs/M: Uses SMD2835 LEDs at 120 LEDs per meter and produces a vibrant yellow light. The rope is also dimmable with a compatible dimmer.
• Long-Lasting Design: Rated for up to 50,000 hours.

Each 120-Volt LED Rope Light Spool Includes:

• (1) Standard 6 Foot Power Cord with a Rectifier (Pre-installed)
• (1) Power Connector (Pre-installed)
• (1) End Cap (Pre-installed)
NOTE:
• We strongly recommend the use of a surge protector with our rope lights.
• All connections must be sealed with a weatherproof heat tape kit when installing rope lights outdoors.
• To avoid damaging your lighting and the possible fire risk, completely unspool lights before connecting to power.
• Prior to cutting or modifying your lights, we recommend testing the light output and color for your project. Failure to test before altering a product may result in the inability to return or exchange your purchase.
• Lights are not supposed to be kept on 24 hours a day. Leaving them on 24/7 can cause them to overheat, shorten their lifespan, and is not covered under warranty. Please turn lights off for a couple of hours each day.

Downloads

SMD LED Neon Rope Light Cut Sheet

SMD LED Rope Neon Light Installation

SMD LED Neon Rope Bending Specificaions